When you are using a gearbox, deformation can cause a lot of harm to many people.
If everyone cannot take effective measures to deal with the deformation problem, you can first take a look at the several ways that the little sister shares with everyone, so that we can reasonably solve this problem in the future.
People need to maintain the plastic deformation and ductility of the gearbox to ensure no deformation during production and processing, especially in quenching and tempering processes.
So, let's take a look at the following content with Zhongcheng, which may help maintain the performance of the gearbox without deformation.
How to avoid deformation of the gearbox? Firstly, if people must alleviate the net weight of the transmission gear by rotating the hole, the process flow of rotating the hole should be allocated after quenching and tempering treatment.
2、 In the quenching or heat treatment of the reducer, it is necessary to maintain a uniform temperature inside the furnace and select fixtures to evenly heat and cool the steel parts with water, and it is prohibited to stack them together.
3、 The quenching and tempering treatment of the transmission gear of the reducer selects high-frequency quenching of the tooth surface that reduces the deformation of the parts; The tooth surface obtained after high-frequency quenching has high compressive strength, strength, and wear resistance, while the core still maintains good plastic deformation and ductility.
4、 To reduce the deformation of machine equipment, high-frequency quenching of tooth surfaces should use lower heat treatment temperatures and shorter heating times, uniform heating, and delayed water cooling.
5、 The increase in oil temperature causes the rubber products inside the clutch of the transmission to become brittle, resulting in deformation and cracking, reducing its performance and service life. This leads to poor connection between the clutch master and slave plates, causing the master and slave plates to deviate from each other, incomplete separation of the clutch, and increased friction, which in turn accelerates the severe wear and tear of the friction plates.
The above article refers to the solution for the deformation of the gearbox shared by everyone. We hope that everyone can follow the above article in the future to handle it.
传真：+86 0519-86580909
地址：Longqian Road, Wujin District, Changzhou, Jiangsu Province