1、 Overview:

The cycloidal pinwheel reducer is a novel transmission device that adopts the K-H-V planetary transmission principle with few tooth differences. The transmission process is as follows: there is a 180 degree offset double eccentricity installed on the input shaft

There are two roller bearings called swivel arms installed on the eccentric sleeve, forming an H mechanism. The center holes of the two cycloidal gears are the raceways of the eccentric sleeve's upper arm bearings, and the cycloidal gears mesh with the needle gears, forming an internal meshing reduction mechanism with a difference of one tooth.

This product is widely used in industries such as metallurgy, mining, lifting, transportation, cement, construction, chemical industry, printing and dyeing, pharmaceuticals, food and environmental protection, etc. Suitable for working environment temperature of -40 ℃&Flash; At 40 ℃, under rated load and speed, the temperature rise of the oil pool of the reducer shall not exceed 60 ℃, and the high oil temperature shall not exceed 80 ℃.

2、 Features:

1. The reduction ratio is large, with a first stage reduction ratio of 1/11 to 1/87; The second level reduction ratio is 1/121~1/7569.

2. High transmission efficiency, due to the rolling friction at the joint of the needle teeth, the average single stage mechanical transmission efficiency can reach over 90%.

3. Small size and light weight: Due to the principle of planetary transmission, the input and output shafts are designed on the same axis, resulting in a compact structure, small size, and light weight.

4. Smooth operation and low noise: The cycloidal needle teeth have a large number of overlapping teeth, resulting in smooth operation and low noise.

5. Small faults and long service life: The main components are made of bearing steel, so the mechanical performance is good and the service life is long.

6. It also has the characteristics of strong overload capacity, impact resistance, and small inertial force distance, suitable for frequent starting and forward and reverse rotation situations, and is easy to disassemble and maintain.

3、 Technical parameters:

Power: 0.18KW~55KW

Torque: 70N/m~20000N/m

Transmission ratio:

Single stage: 11-87

Dual stage: 121-5133

Level 3: 6545-446571