At many times, if everyone cannot install and lubricate the cycloidal reducer properly, it can cause some very serious hazards. We hope that everyone does not have to ignore common problems at this level.

So how to carry out installation and lubrication to avoid errors? Everyone, please take a look at the actual detailed introduction in the following article first: 1. Cycloidal reducers generally need to be installed on a horizontal surface with an inclination of no more than 10 °. If the inclination must exceed 10 ° due to uniqueness, please contact our company before application to facilitate mutual discussion of relevant matters.

2. When connecting the input shaft and output shaft with the driving force and supporting facilities of mechanical equipment, if a coupling is used for connection, it is required that the shaft is strictly aligned with the shaft, and there must be no different centering conditions. The use of V-belts and transmission chains is not suitable for being too tight or too loose.

3. The installation should be sturdy and reliable, without any vibration or detachment. Fixed screws should be strictly used in accordance with relevant specifications and requirements.

4. The installation screws should be regularly maintained to ensure they are tightened and fixed firmly. The sealing gasket should be made of elastic yellow as much as possible.

2、 Lubrication 1. Generally, oil pool lubrication is used for reducers. Before application, be sure to add medium extreme pressure engine oil N220 or N320 to the required area (20-30mm above the missing teeth) and fill it on time.

2. After 50 hours of use, the oil should be replaced first and the internal oil stains of the human body should be cleaned thoroughly. Afterwards, it should be completely replaced every three months.

3. Oil seal oil leakage, please replace it independently as soon as possible.

Generally, everyone follows the above method to install and lubricate the cycloidal reducer, so there is no need to worry about unexpected events in future applications.

• Assembly line, ...下一篇
• No More!上一篇