The key performance of a gear reducer comes from the internal gears. Only when the internal gears meet the quality regulations can they have stable operation. So, what level of quality regulations should its internal gears meet* Firstly, it is necessary to have stronger compressive strength. This type of product is not only a variable speed device, but also a gear transmission. If the gear does not have stronger strength, it is very easy to cause tooth breakage. Therefore, when it comes to gear quality regulations, * must first comply with these regulations.

Moreover, it means that the internal gears of gear reducers must also have high precision regulations. Gear accuracy refers to the accuracy of its deceleration. Some commercial reducers have low precision in application, and nature also causes it due to insufficient gear accuracy. Perhaps this also depends on the manufacturer's processing technology for gears in production and manufacturing. If the processing technology is not high, nature will also reduce its accuracy to a certain extent, Therefore, it is the overall strength of the manufacturer's production and manufacturing that has been honed.

And during the entire operation process of the gear reducer, there must also be a certain amount of noise reduction. If the noise during its operation is very high, it can also have a significant harm to the natural environment. Some manufacturers have products that can be applied, but their performance can also be considered according to application specifications. However, due to the high noise, some customers may not choose them.

*Ultimately, it depends on the net weight of the product itself. Customers expect that the weight of the product can be reduced throughout the entire application process, but this also depends on the manufacturer's selection of raw materials. As some gears have relatively large raw materials, their machinery and equipment may also increase in weight, making it difficult for them to integrate into the office environment. Therefore, the internal gears must also consider this regulation.

• Proper handling...下一篇
• Select cycloida...上一篇